MEC 20000 pages
MEC 2000
Automatic metal cutting machine for higth production with a high quality of cut in tolerance and perpendicularity,
adapt for any kind of solid bars as well as tubes in round, square or rectangular section, or profiles.
Round tube: from Ø 10mm, to Ø 100mm;
Square tube: from 10x10mm, to 80x80mm;
Rectangular: from 10x20mm, to 60x100mm;
Bar: from Ø 12mm, a Ø 40mm;
HEADS TIPE
STANDARD CUTTING HEAD
► Inclined
cutting advancing from behind saw head mounted on prismatic guides,
with possibility of adjusting any possible play between the slides and the head,
with automatic centralized lubrication.
► Composed with hardened and ground helicoidal gears to obtain an high operating
rate, without any play or vibration of the saw blade.
► Blade speed: from 30rpm to 400rpm can be adjusted through inverter directly
from the interface UNI eTOP 05.
► HSS blade.
► Diameter the blade min ø 250 mm - max: 350 mm.
► Blade lubrication and cooling system
LOADERS TYPE
AUTOMATIC SLOPE LOADER “M”
Suitable for the following material dimension:
► Round tubes from ø 6mm to ø 90mm.
► Square tubes from 10x10mm to 100X100mm.
► Rectangular tubes from 10x10mm to 120x80mm.
► Wall thickness up to 5mm for steel and stainless steel.
► Tube
length from 2.5m to 6.5m (optional up to 9m).
► Loader gripper to feed the material into the machine.
► Load capacity limited to the inclined chute.
► Loader support to position the material on the inclined plane.
Others options will be indicated in an official quote.
1