7065 Pressure Indicator0 pages
Time Electronics
7065 Pressure Indicator/Calibrator Module
• Vacuum to 600bar versions available
• Best accuracy 0.04% of full scale
• Pneumatic or hydraulic input connection
• Ideal for use with 7194 and 7195 pumps
• 4.5 digit display
• 5 selectable engineering units
• Over-pressure alarm
• RS-232 serial interface
• EasyCal software compatible
DESCRIPTION
The 7065 is a precision indicator module that can be used for pressure or vacuum calibration. It is a simple operation module ideal for
calibrating and cross-checking pressure gauges, sensors, transmitters, transducers, indicators, switches, and many other devices.
The following versions are available; 0.2, vacuum to 2, 5, 10, 20, 35, 70, 100, 200, 400, or 600bar.
Features include a 4.5 digit LCD display, 5 pressure units, zeroing switch and pressure measurement input. Best accuracy is 0.04% of
full scale. For input pressure Time Electronics have a range of pumps including the 7194 benchtop pneumatic pump (vacuum to
120bar) and 7195 hydraulic benchtop pump (vacuum to 600bar). Each pump features a double output manifold to enable connection
to both the module and device under test. They can be used conveniently on the CalBench worktop to provide a precision pressure
source to the 7065 and DUT, with a method that requires minimal user effort.
The 7065 is fitted as standard with an RS-232 interface which is accessible on the rear of the CalBench console or internally connected
to a 7051 calibrator/control centre. This enables communication and read back with EasyCal calibration software (supplied as
standard with the 7051 multifunction calibrator/control centre module). With EasyCal the user can define and perform pressure
calibration procedures as well as create and print traceable calibration certificates.
SPECIFICATIONS
Specifications are for 1 year at 23ºC ±5ºC. Accuracy includes linearity and long term effects.
All accuracies are ±1 digit. For operation outside specified temperature range, apply 70ppm per °C
Range (bar)
0 to 0.2
Vac to 2
0 to 5
0 to 10
0 to 20
0 to 35
0 to 70
0 to 100
0 to 200
0 to 400
Accuracy (% of fs)
0.1
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.1
0.1
0.1
Resolution (bar)
0.01mb
.0001
0.001
0.001
0.001
0.01
0.01
0.01
0.01
0.1
0.1
0 to 600
Units..................................................... 0.2bar: mbar, PSI, kPa, kg/cm2, cmWg / Vac, 2, 5, 10 & 20bar: bar, PSI, kPa, kg/cm2, cmWg
................................................................35bar and above: bar, PSI, MPa, kg/cm2, Atm.
Maximum Pressure.............................. 2 x range, 1.5 x range for 20bar and above versions
Sensor.................................................. Piezo-resistive - stainless steel diaphragm
Over Pressure Warning........................ 1.2 x range full scale - audio and visual (on LCD) warning
Fittings.................................................. Quick Release (under 20 bar) and Minimess (over 20 bar)
Interface............................................... RS-232 for readback (using EasyCal on 7051 if ordered)
Module Width....................................... 96mm (primary or secondary console fitting)
ORDERING INFORMATION
7065..................................................... Pressure Indicator Module (+ pressure range code
shown below)
Range (bar)
0.2
Vac to 2
5
10
20
35
70
100
200
400
600
Option Code
7100
7101
7102
7103
7104
7105
7106
7107
7108
7109
7110
ECFLA.................................................. EasyCal Calibration Software. See separate data sheet for further information.
Pumps.................................................. 7194 / 7195: See separate data sheets for information, other pumps available.
C178..................................................... Factory Calibration Certificate (NPL traceable)
C190..................................................... UKAS Calibration Certificate (ISO 17025)
Due to continuous development Time Electronics reserves
the right to change specifications without prior notice.
Time Electronics Ltd, Unit 11 Sovereign Way, Botany Industrial Estate, Tonbridge, Kent, TN9 1RH. United Kingdom.
T: +44 (0) 1732 355993 F: +44 (0) 1732 770312 E: mail@timeelectronics.co.uk W: www.timeelectronics.com
v1b 8/3/13
"