Light Duty Pharmaceutical Probe LDP0 pages

DATA SHEET No. 012

Light Duty
Pharmaceutical
Temperature Sensor

Light Duty Pharmaceutical
Temperature Sensor
In areas of process plant where thermowells are not a necessity temperature
sensors with a plain sheath and a process connection are often adequate.
Connection heads in either white polypropylene or stainless steel make these
units acceptable for use in many pharmaceutical production areas, whether in
protected areas or exposed to harsh environmental conditions.

S P E C I F I C A T I O N
MECHANICAL
Sheath

3.0mm, ⅛”, 4.0mm, 4.5mm, 5.0mm, 6.0mm, ¼”, ¼”, 7.0mm or 8.0mm
OD in 316 (1.4044) stainless steel.

Screwed (LDPS)
process connection

optional ¼” to 1” BSPT/BSPP or NPT.

Flanged (LDPF)
process connection

sliding flange (LDF) or Tri-clover flange (LDF-T) .

Connection head

in white polypropylene or 316 (1.4401) stainless steel with screw cap,
retention chain and cable entry screwed M20. Environmental rating to
IP67.

ELECTRICAL
Resistance Thermometer
Detector
single or duplex PT100 with 3/4 wire connection, Class ‘B’, ’A’, 1/3 or
1
/10 DIN tolerance and to BS EN 60751:2008.
Operating range

Product code :
LDP

Thermocouple
Detector

Operating range

standard range -50 to +250°C (-58 to+480°F
single, duplex or triplex elements (dependant on sheath OD), types
‘T’ (Cu/Con) BS EN 60584-1:2013.
standard range -50 to +250°C (-58 to+480°F).

Temperature Transmitter
A temperature transmitter with a 4 to 20mA output can be supplied in place of the connection block
for both hazardous and non-hazardous duties.
Other dimensions and tolerances outside the above specifications may also be available on
application.
©Thermal Detection 2014