CoolPointSmall with IS (1/4 - 1/2 inch)0 pages

U
N
I
V
E
R
S
A
L
Maximum flow ranges fromt
Max pressuret
Temperature ranget
®
F L O W
M O N I T O R S
UNIVERSAL
Flow Monitors
®
4-12 GPM (15-45 LPM)
300 PSI (20 Bar)
32-210°F (2-99°C)
CP 1/4-1/2 Inch
CoolPoint
™
Vortex Shedding
Flowmeter
Description
User-Configurable Options
This flowmeter is made for water, water/glycol coolant of low viscosity fluids. There are no moving parts
to clog or wear. They are certified CSA and CE. They
have a 4-20 mA output. There are two versions. The
three wire version (power supplied separate from the
4-20) has a solid state relay that can be configured as
an alarm or as a pulse out. It has a bright LED digital
display of flow rate.
The two wire version (option E14) has no display,
pulse out or alarm point. It can be operated in an
intrinsically safe mode only when used in conjunction with an approved intrinsic safety barrier meeting
required entity parameters.
Instrument Specifications
Features that are selectable on the 3 wire standard
4-20 mA units include:
•t Selectable alarm state (N.O. or N.C.)
•t Set point or pulse output
•t Engineering units (GPM, LPM)
•t Flow
t Visual readout: 3 digit LED, 0.3" digit height
(3 wire units only)
t Response time: 450 ms.
t Deadband for Alarm: 5% of full scale (maximum flow)
(3 wire units only)
t Accuracy: ±2% of full scale
t Repeatability: ±.25% of indicated flow
t Turndown (ratio of max to minimum flow rates):
10:1 at all temperatures and 20:1 available optionally
for standard temperatures.
•t Pressure
t 300 PSIG (20 Bar) operating pressure
•t General
t Fluid temperature limits: 35-150° F (2-66° C)
standard, 150-210° F (66-99° C) optional for standard
3 wire transmitter only.
t Enclosure rating: IP 65, Type 1, 3, 4, 12 and 13
•t Pipe Connections:
t Female NPT, BSPP & BSPT
•t Back pressure of 10 PSIG required
Electrical Specifications
•t Input Power: 10 - 30 VDC @ 80 mA standard, 25
mA for the 2 wire option
•t Output: 4-20 mA for flow rate
•t 100 pulses per gallon from the solid state relay for
3 wire (standard) option
•t Electrical Connection
Pin Connector (standard)
Pigtails (optional)
Junction Box with terminal strip (optional)
Material Specifications
Flow bodies of brass or 316 Stainless Steel with
PVDF sensors and Viton® seals standard. PEEK
sensors used for high temp for fluids above 150° F.
CPSmall091412 t
Viton® is a registered trademark for DuPont Performance Elastomers.
1t