Vacuum lifter handling sheet metal0 pages

TAWIGrip

TAWI.com

TAWIGrip vacuum grippers for sheet/panel up to 500 kg

TAWIGrip sheet metal Lifter
This is an electric vacuum yoke with two crossbars
and four suction cups, Ø150 mm.
Max lifting capacity is170 kg.
The handle is foldable, 90° upwards, to save space
when not in operation.
The vacuum is generated electrically on this
gripper, no compressed air necessary. An electric
pump creates the correct level of vacuum in the
yoke system and then shuts down. If the under
pressure sinks below 60%, the pump
automatically restarts to reach correct level.

—
—
—
—
—
—
—
—
—

TAWIGrip vacuum gripper can lift, tilt and rotate sheet metal, glass and laminated panels.
Choose between: TAWIGrip with Pneumatic Vacuum Source or Electric Vacuum Source.
Horisontal: Up to 500 kg or more on request. Vertical: Up to 250 kg.
Choose between: Horisontal-Horisontal, Horisontal-Vertical, Vertical-Vertical
Safe, two-handed release function
Visual control of the vacuum level
Easy-to-use control board
Twin chamber vacuum system
Light weight design

©Copyright TAWI AB Sweden 2011 All rights reserved

TAWI AB Box 10205 434 23 KUNGSBACKA SWEDEN • Tel +46 (0)300 18500 • info@tawi.se • www.TAWI.com