Condensate Pump K20 pages
Condensate pump K2
Application
The K2 condensate pump has been specially developed for removing condensate from condensing boilers, air conditioning
systems and air dehumidifiers.
The K2 satisfies the highest requirements. It is distinguished not
only by its modern design but above all by its consistently quiet
operation, its compact tank dimensions and its reliability. The
pump is ready to connect and operates fully automatically.
The pump incorporates a built-in alarm. The wear-free sensor
system monitors the running time of the pump and gives early
warning of potential faults. This message can be conveyed to an
external transmitter using the potential-free contact to
generate a signal. The two-part design of the motor and collecting chamber and the clip fasteners at the side make for easy
cleaning without tools.
The K2 is resistant to acid condensate with a pH-value of ≥ 2.7.
The maximum inlet temperature of the pumped media is 104°F
(40°C).
In the case of larger volumes of condensate or additional waste
water, we recommend using the Hebefix above floor sump with
a U 3 KS spezial.
Performance
t For condensat ≥ pH 2,7
t Extremly quiet operation
t Ready to connect
t Wall or floor mounting
t Alarm with watchdog timing
monitoring
t Potential free alarm contact
t Swing-type check valve
t6 m pressure tube with connector DN 50
t Easy to maintain
43472-01
We reserve the right to change specifications without notice
D 128–1.2 EN–1205
1
"