Gravity Chute GS0 pages

tr.row {}
td.cell {}
div.block {}
div.paragraph {}
.font0 { font:9.00pt "Arial", sans-serif; }
.font1 { font:11.00pt "Arial", sans-serif; }
.font2 { font:13.00pt "Arial", sans-serif; }
.font3 { font:15.00pt "Arial", sans-serif; }
.font4 { font:26.00pt "Arial", sans-serif; }
.font5 { font:12.00pt "Franklin Gothic Medium", sans-serif; }
InterSvstems
GS GRAVITY CHUTE/UNDER CONVEYOR
INTERSYSTEMS INDUSTRIAL SAMPLERS
AIR CONTROLLED
MOVABLE SAMPLE DISCHARGE
MATERIAL FLOW
SPRING TENSION GUIDES
SAMPLE, TO COLLECTION
MOUNTING PLATE FLAT OR SPECIFIED RADIUS
UHMW
BEARING
PLATE
AIR CYLINDER
GS SHOWN MOUNTED
L|J TO A FLAT BOTTOM CONVEYING SYSTEM
GS SHOWN MOUNTED TO A ROUND BOTTOM
CONVEYING SYSTEM (SPECIFY RADIUS)
GS
An industrial sampler for collecting samples of free flowing materials, including granules and pellets. Collects a sample when mounted beneath an auger, drag conveyor or sloped gravity chute. When activated, the sample discharge moves on a sliding plate over an opening in the chute housing, allowing access to the product stream. The opening, which can be sized per the material, allows the sample to enter the sample discharge port. The sample then flows through the opening and into the sample collection device of your choice. The slide plate and sample discharge port then return to the start position, sealing the opening. Standard construction is heavy gauge steel. Other construction materials are available as required by the application.
CONTROLS
InterSystems control packages are available to suit any sampling control application. The standard units allow manual and automatic sampling modes and contain all the essential components to adjust and control the timing of sampling operations. These units can handle a wide variety of voltages and frequencies and can be constructed for most environments.
POWER REQUIREMENTS
Electric: 110V, single phase. Pneumatic: 80 PSI.
InterSvstems