عضویت 
ورود اعضا
راهنمای خرید
Even flat spray nozzles VE/VEP0 pages
Even Flat Spray Nozzles VE / VEP
[Spray pattern]
[Spray distribution]
[Features]
• Flat spray pattern with uniform distribution
throughout pattern area.
• Even spray impact across the entire spray
area.
[Standard Pressure]
0.3 MPa
LL
[Applications]
Cleaning: Automotives, containers, films, felts, filters, screens, bottles, crushed
stones, earth and sand, metal parts, machines, steel plates, steel
pieces, wires
Spraying: Etchants, oils, lubricants, liquids, solutions, insecticides, herbicides
Cooling: Gas, smokes, heat exchangers, tanks, steels, roofs
Water screen: Fire protection, heat protection, dust suppression, deodorization
VE series
VE series (three-piece structure) | |
Structure | • Three-piece structure with ceramic orifice inserted. • Comprises three parts: Spray tip, cap, and adaptor. Worn-out spray tip can be replaced separately. • Removable strainer is fitted and supplied as standard part with small capacity nozzle. • CERTIIM® is one-shot injection molded spray tip created by molding the precision-made ceramic orifice into a plastic retainer. |
Material | • Spray orifice: ceramic • Tip retainer: S303 or B (brass) or PVDF (polyvinylidene fluoride) • Cap, Adaptor and Strainer: S303 or B (brass) • Optional material: S316 or others |
Mass | • Complete nozzle S303: 49 g B (brass): 53 g • Spray tip S303:6.5g B (brass): 7 g CERTIIM®: 2 g |
Hex 17
! J- |
(When with a strainer, add 2-5 g to the mass for a complete nozzle and 2 mm to
the total length.)
[Note] Appearance and dimensions may differ slightly depending on materials and
nozzle codes.
[Spray tip]
©Ceramic orifice (DAdhesive: Araldite® (3)Tip retainer
(DCap ©Strainer holder ©Strainer screen (S316)
©Strainer cap ©Adaptor
■ VEP series ■
VEP series (one-piece structure) | |
Structure | • Ceramic orifice inserted and adhered into metal or plastic body. • CERTIIM® is a plastic spray nozzle with a one-shot injection molded ceramic orifice. |
Material | • Spray orifice: ceramic • Metal parts: S303 or B (brass) • CERTIIM®'s plastic body: PVDF (polyvinylidene fluoride) • Optional material: S316 or others |
CERTIIM®
Pipe conn, size
Pipe conn, size | Dimensions (mm) | Mass (g) | ||||||
Li | l_2 | H | ^D | N | S303 | B | CER- TIIM® | |
VsM | 16.5 | 30 | 12 | 7.5 | 6.5 | 8 | 9 | |
1/4M | 26 | 40 | 14 | 10 | 10.5 | 20 | 22 | |
3/8 M | 30 | 19 | 11 | 33 | 35 | |||
1/2 M | 38 | 23 | 14 | 57 | 62 | |||
CERTIIM®1/8M | 22 | 12 | 8.5 | 2.1 | ||||
CERTIIM®1/4M | 26 | 14 | 10.5 | 6 | ||||
(When with a strainer, add 2-5 g to the above mass.)
[Note] Appearance and dimensions may differ slightly depending on materials and
nozzle codes.
A Nozzle (0Ceramic orifice (DAdhesive: Araldite® (3)Body)
©Strainer / ©Strainer holder ©Strainer screen [S316] \
\(DStrainer cap j
24
"
