3-pcs. ball valve0 pages
3-PC BALL VALVE
nnnnType 1210: STEEL
nnnnType 1310: STAINLESS STEEL
nnnnGENERELT
nnnnPressure/size:
nnnnMaterial:
nnnnISO top flange:
nnnnThread:
nnnnButt weld ends:
nnnnOPTION
nnnnType:
nnnnConnection:
nnnnSeat/pa eking:
nnnn125 bar (1/4" - 1 1/4")
nnnn100 bar (1 1/2" - 2 1/2")
nnnn(Pressure depends on packing
nnnnmaterial and temperature)
nnnnSteel and stainless steel
nnnnISO 5211
nnnnBSPP - DIN259.2999
nnnnType 1210 - B16.25
nnnnType 1310 - DIN 2463
nnnn- ISO 1127
nnnn- SMS3008
nnnnFire safe API 607 og BS 6755
nnnnBSPT, BS 21, NPT, ANSI B 2.1,
nnnnJISPT, etc.
nnnnSocket weld ANSI B 16.11
nnnnVarious materials
nnnnMATERIAL
nnnn©-@
nnnnNO. | DESCRIPTION | STAINLESS STEEL(1310) |
1 | BODY * | STAINLESS STEEL AISI 316 |
2 | CONNECTION* | STAINLESS STEEL AISI 316L |
3 | BALL | STAINLESS STEEL AISI 316 |
4 | SEAT PACKING | PTFE WITH 25% GRAPHITE |
5 | JOINT GASKET | PTFE |
6 | STEM | STAINLESS STEEL AISI 316 |
7 | PYRAMID SEGMENT | PTFE WITH 25% GRAPHITE |
8 | STEM SEAL | 75% PTFE, 20% GLASFIBRE, 5% GRAFHITE |
10 | BELLEVILLE WASHER** | STAINLESS STEEL AISI 301 |
11 | LOCK SADDLE | STAINLESS STEEL AISI 304 |
12 | STEM NUT | STAINLESS STEEL AISI 304 |
13 | HANDLE | STAINLESS STEEL AISI 304 |
14 | HANDLE SLEEVE | VINYL |
15 | STOP BOLT | STAINLESS STEEL AISI 304 |
16 | BOLT | STAINLESS STEEL AISI 304 |
17 | NUT | STAINLESS STEEL AISI 304 |
18 | LOCKING DEVICE | STAINLESS STEEL AISI 304 |
19 | ANTI-STATIC DEVICE | STAINLESS STEEL AISI 304 |
Type 1210:
nnnn* A216 Gr. WCB
nnnn** 50CrV4
nnnnDESCRIPTION
nnnnSolid ball valve for high performance tasks. All ball valves
nnnnare CE/Atex approved and pressure tested. Can on demand be
nnnndelivered with certificate EN 10204 - 3.1.
nnnnBold circle diameter and face to face dimensions of the
nnnnbody is equal to Worcester, Valtac and Mecafrance from DN15
nnnnto DN65 RB. This means that our type 1210/1310 can be
nnnnmounted between existing end caps.
nnnnAntistatic stem with pyramid segment. Stem with 45°
nnnnface of contact. This means larger contact area together with
nnnnreinforced stem seat and a surface quality on Ra 0,2 ~ 0,3
nnnnum. These advantages will provide the posibility of a very long
nnnnlifetime.
nnnnPTFE with 25% carbon fill are used for seats and pyramid
nnnnsegment. This material is very suitable for high pressure and
nnnntemperature and it is even more resistant to wear than tradi-
nnnntional PTFE.
nnnnISO 5211 flange with
nnnnrecess centers bracket and
nnnnactuator in order to avoid
nnnnany dynamic load on the
nnnnstem and stuffing box.
nnnnaellevilta Washer
nnnnV LhEvron
nnnnpacking
nnnnpyramid slem ■
nnnnMaintenace free stuffing
nnnnbox with belleville washers.
nnnnReinforced V-rings and FPM O-ring will provide optimum
nnnnpacking and longer lifetime - also at various temperatu-
nnnnres.
nnnnStainless steel butt weld end caps according to ISO
nnnn1127 is standard. From stock we can also deliver butt
nnnnweld caps according to SMS 3008.
nnnnDS-1210-UK-260111-6 - We reserve the right for changes
"