"
Precision Weighing Station
Construction
MicroGARD
The three-sided one piece, molded
clear scratch-resistant acrylic enclosure
surrounds your work surface, permitting
maximum light penetration.
• Tabletop design, ts compactly on
your lab bench
• Wide radius interior corners simplify
cleaning of the scratch-resistant acrylic
surfaces
• A 16-gauge stainless steel HEPA lter
enclosure contains the lter, blower and
flow switch; all components are surrounded by clean HEPA-ltered air
®
Applications
The benchtop MicroGARD® weighing station features controlled airow and HEPA ltration
to protect both personnel and the environment. Model shown includes optional stainless
steel work surface.
Aerodynamics
The Baker Company MicroGARD is
designed to create a precise, horizontal
airow across the work surface. The
MicroGARD® draws room air through
the front opening and through a HEPA
lter, protecting the worker as well as the
laboratory environment from airborne
particulates expressed in the work area.
• Contaminated air is HEPA-ltered for
environmental protection
®
• Provides convenient method of changing
HEPA lter while minimizing release of
trapped chemicals
• An aerodynamic airfoil minimizes
turbulence of the front opening and within
the molded scratch-resistant acrylic enclosure
Controls
The 115V, AC motorized centrifugal
blower is controlled by a variable
speed controller.
• The main power switch is
illuminated to conrm on/off position
• Built-in ow switch warns of low
airow
• Precision weighing of ne powders
and chemicals, including hazardous
chemicals
• Small animal research
• Tissue homogenization
• Liquid ltering
• Forensics
Options
• Flat reinforced 16-gauge stainless steel
work surface; 1" epoxy work surface,
dished; 1" phenolic work surface, dished
• Standard 115V, AC electrical outlet
• Access port in scratch-resistant
acrylic enclosure for cords, probes,
cables
• Filter and ow switch housing only
(excludes blower) with 6" diameter
(15.2cm) exhaust collar for connection
to facility exhaust system
Specications
Exterior Dimensions
32.5"W x 31.625"F-B x 31.625"H
(82.6cm x 80.3cm x 80.3cm) nominal
Inlet Opening Dimensions
27.06"W x 13.96"H
(67.65cm x 34.5cm) nominal
P.O. Drawer E, Sanford, Maine 04073 (207) 324-8773
1-800-992-2537
©2004 The Baker Company
OW7188.25 3/04
Work Area
27.06"W x 20.5"D
(67.65cm x 52.1cm)
FAX (207) 324-3869
Electrical
115V, AC
www.bakerco.com
"