'S' Beam Load Cell - Bi-directional0 pages

tr.row {}
td.cell {}
div.block {}
div.paragraph {}
.font0 { font:7.00pt "Arial", sans-serif; }
.font1 { font:8.00pt "Arial", sans-serif; }
.font2 { font:9.00pt "Arial", sans-serif; }
.font3 { font:10.00pt "Arial", sans-serif; }
.font4 { font:11.00pt "Arial", sans-serif; }
.font5 { font:15.00pt "Arial", sans-serif; }
.font6 { font:19.00pt "Arial", sans-serif; }
Tension and Compression I
Sealed 'S' Beam DBB
LOAD CELLSeries
■ Capacities 50kg to 5000kg (for sub-50kg please see DBBSM)
■ Sealed to IP67 or IP68
■ Robust Construction
■ Simple Installation
■ High Performance
■ 3 YEAR WARRANTY
Options Available
Other Ranges Available on request Equivalents to other manufacturers' available Spherical Rod End Bearings Load Buttons Different Cable Lengths
Full range of mounting options available (consult factory)
500VAC Certification
BASEEFA Certification (DBBW only)
DESCRIPTION
The DBB series S-beam load cell is designed for force measurement and weighing applications alike. It's ease of mounting makes it very attractive for use as a general purpose load cell.
There are two versions available within the standard range. The DBBE, an encapsulated cell sealed to IP67 covering ranges of 50kg to 500kg and a fully welded cell, the DBBW, sealed to IP68 covering ranges of 500kg to 5000kg.
There are many options that are available to further enhance the usefulness of this series of load cells, as well as higher accuracy versions.
Sense wires are provided on each of the load cells to compensate for changes in lead resistance due to temperature change and/or cable extension. Sensing can be achieved by feeding this voltage into the appropriate electronics (please refer to the instrumentation datasheets).
Transducer Specialists...
APPLIED MEASUREMENTS LIMITED
3 MERCURY HOUSE - CALLEVA PARK - ALDERMASTON - BERKSHIRE - RG7 8PN - UK
Tel: (+44) 0118 981 7339 Fax: (+44) 0118 981 9121 email: info@appmeas.co.uk Internet: www.appmeas.co.uk